-
60GHz doppler radar module
The microwave motion detection module is based on Infineon BGT60LTR11AIP sensor and includes all necessary components to operate in autonomous mode.
The module could save up to 95-99% of your electrical bill for out of work lights.
-
Advantages over PIR
- High sensitivity to motion in any direction
- Higher sensitivity to micro motions: reliable presence detection even when the person is standing still long
- Resistance to moisture, dirt and temperature
- Accurate and robust performance
- Wall penetration
- Size and space savings
- Hidden sensing applications behind radome: it can be built-in into your lamp
-
Module benefits
- Compact size: as small as 15x10x1.5mm
- Whide operation voltage: 2.3..5.5V
- Low power consumption (about 4mA)
- Adjustable detection range: from 0.5 to 10m
- Adjustable hold time
- High-current outputs to drive LEDs directly (up to 4.4A)
- Inverted output to drive external MOSFETs if needed
- Pinout: power and output pins are pocated on both sides for routing convenience
- SMT friendly: regular and clear footprint
- Tape and Reel package
-
Download
BGT60MV-RST Datasheet
-
-
LED-strip to upgrade HDB 10W lamps
-
Safety and Security
- Dim light: LED strip provides dimmed light to commuters to observe the surrounding area
- High motion sensitivity: virtually impossible to hide and stand still without triggering a light on
- Wall penetration: light would be triggered on even out of a direct sign of a commuter
- Long detection range: up to 7m for approaching/departing human
-
Environmental benefits
- Reducing power consumption and carbon footprint up to 97% during "out of work" time
- Low e-waste: LED strip upgrade produced much less waste compared to the total lamp replacement
- Longer life span due to better thermal performance (aluminium substrate) and lesser power dissipation
-
Low upgrade cost
- LED strip is much cheaper than entire lamp
- Easy to replace: the strip has the same positions of mounting holes and wire connections points
- The strip is mechanically and electrically compatible with model LF212-840
- Simple replacement: the strip can be replaced "in-field" by simple tools like a screwdriver
- Terminal blocks for fast wiring
- Low voltage wiring: the strip utilizes the existing 30V power supply
-
Watch video
-
Download
LED-HDB-10W strip Datasheet
-
-
Alarm motion detector
The detector is based on the 60 GHz doppler radar module BGT60M1-000 and is supposed to be used in alarm systems as a motion detector.
-
Advantages over PIR and MW
- High sensitivity to motion in any direction.
- Higher sensitivity to micro motions: reliable presence detection even when the person is standing still long.
- Selectable detection range from approx 3 to 8 m.
- Resistance to moisture, dust, and shielding.
- Low power consumption.
- Wide operation voltage range 5 to 24V.
-